Database Access GUI Clients

This guide describes how to configure popular graphical database clients to work with Teleport.

Setting up your Teleport environment

Prerequisites

• A running Teleport cluster. If you want to get started with Teleport, sign up for a free trial or set up a demo environment.

• The tsh client tool. Visit Installation for instructions on downloading tsh. See the Using Teleport Connect guide for a graphical desktop client that includes tsh.

• To check that you can connect to your Teleport cluster, sign in with tsh login. For example:

  tsh login --proxy=teleport.example.com --user=email@example.com

• The Teleport Database Service configured to access a database. See one of our guides for how to set up the Teleport Database Service for your database.

Get connection information

# Start the local proxy.
$ tsh proxy db --tunnel <database-name>
Started authenticated tunnel for the <engine> database "<database-name>" in cluster "<cluster-name>" on 127.0.0.1:62652.

tsh proxy db --db-user=my-database-user --db-name=my-schema --tunnel <database-name>

tsh proxy db <database-name>
Started DB proxy on 127.0.0.1:61740
Use following credentials to connect to the <database-name> proxy:  ca_file=/Users/r0mant/.tsh/keys/root.gravitational.io/certs.pem  cert_file=/Users/r0mant/.tsh/keys/root.gravitational.io/alice-db/root/<database-name>-x509.pem  key_file=/Users/r0mant/.tsh/keys/root.gravitational.io/alice

View configuration for the database you're logged in to.
tsh db config
View configuration for the specific database when you're logged into multiple.
tsh db config example

Name:      example
Host:      teleport.example.com
Port:      3080
User:      postgres
Database:  postgres
CA:        /Users/alice/.tsh/keys/teleport.example.com/certs.pem
Cert:      /Users/alice/.tsh/keys/teleport.example.com/alice-db/root/example-x509.pem
Key:       /Users/alice/.tsh/keys/teleport.example.com/alice

tsh proxy db <database-name>
Started DB proxy on 127.0.0.1:61740
Use following credentials to connect to the <database-name> proxy:  ca_file=/Users/r0mant/.tsh/keys/root.gravitational.io/certs.pem  cert_file=/Users/r0mant/.tsh/keys/root.gravitational.io/alice-db/root/<database-name>-x509.pem  key_file=/Users/r0mant/.tsh/keys/root.gravitational.io/alice

MongoDB Compass

Compass is the official MongoDB graphical client.

On the "New Connection" panel, click on "Fill in connection fields individually".

On the "Hostname" tab, enter the hostname and port of the proxy you will use to access the database (see Get connection information). Leave "Authentication" as None.

On the "More Options" tab, set SSL to "Client and Server Validation" and set the CA as well as the client key and certificate. Note that a CA path must be provided and be able to validate the certificate presented by your Teleport Proxy Service's web endpoint.

The following fields in the More Options tab must correspond to paths printed by the tsh proxy db command you ran earlier:

Click on the "Connect" button.

MySQL DBeaver

Right-click in the "Database Navigator" menu in the main view and select Create > Connection:

In the search bar of the "Connect to a database" window that opens up, type "mysql", select the MySQL driver, and click "Next":

In the newly-opened "Connection Settings" tab, use the Host as localhost and Port as the one returned by the proxy command (62652 in the example above):

In that same tab, set the username to match the one that you are connecting to using Teleport and uncheck the "Save password locally" box:

Click the "Edit Driver Settings" button on the "Main" tab, check the "No Authentication" box, and click "Ok" to save:

Once you are back in the "Connection Settings" window, click "Ok" to finish and DBeaver should connect to the remote MySQL server automatically.

MySQL Workbench

MySQL Workbench is a GUI application that provides comprehensive MySQL administration and SQL development tools.

In the MySQL Workbench "Setup New Connection" dialog, fill out "Connection Name", "Hostname", "Port", and "Username":

In the "SSL" tab, set "Use SSL" to Require and Verify Identity and enter the paths to your CA, certificate, and private key files (see Get connection information):

The following fields in the SSL tab must correspond to paths printed by the tsh proxy db command you ran earlier:

Optionally, click "Test Connection" to verify connectivity:

Save the connection and connect to the database.

NoSQL Workbench

From the NoSQL Workbench launch screen, click Launch next to Amazon DynamoDB. From the left-side menu select Operation builder, then + Add connection. Choose the DynamoDB local tab, and point to your proxy's endpoint. This is localhost:62652 in the example above. (See Get connection information for more information.)

SQL Server with Azure Data Studio

In Azure Data Studio create a connection using your proxy's endpoint. This is localhost,62652 in the example above. On a Windows machine, using an address in the format 127.0.0.1,62652 could be required instead of localhost. (See Get connection information for more information.)

Create a connection with Microsoft SQL Server with these settings:

Example:

Click Connect to connect.

PostgreSQL DBeaver

To connect to your PostgreSQL instance, use the authenticated proxy address. This is 127.0.0.1:62652 in the example above (see the “Authenticated Proxy” section on Get connection information for more information).

Use the "Database native" authentication with an empty password:

Clicking on "Test connection" should return a connection success message. Then, click on "Finish" to save the configuration.

PostgreSQL pgAdmin 4

pgAdmin 4 is a popular graphical client for PostgreSQL servers.

To configure a new connection, right-click on "Servers" in the main browser view and create a new server:

In the "General" tab of the new server dialog, enter the server connection name:

In the "Connection" tab, fill in the hostname, port, user and database name from the configuration above:

In the "SSL" tab, set "SSL Mode" to Verify-Full and fill in paths for client certificate, key and root certificate from the configuration above:

The following fields in the SSL tab must correspond to paths printed by the tsh proxy db command you ran earlier:

Click "Save", and pgAdmin should immediately connect. If pgAdmin prompts you for password, leave the password field empty and click OK.

Microsoft SQL Server Management Studio

In Microsoft SQL Server Management Studio connect to a database engine using your proxy's endpoint. This is localhost,62652 in the example above. Using the IP 127.0.0.1,62652 connection could be required on a Windows machine instead of localhost. (See Get connection information for more information.)

Create a connection with Microsoft SQL Server with these settings:

Example:

Click Connect to connect.

Redis Insight

After opening Redis Insight click ADD REDIS DATABASE.

Now start a local proxy to your Redis instance:

tsh proxy db --db-user=alice redis-db-name.

Click Add Database Manually. Use 127.0.0.1 as the Host. Use the port printed by the tsh command you ran in Get connection information.

Provide your Redis username as Username and password as Password.

Next, check the Use TLS and Verify TLS Certificates boxes. Copy the contents of the files at the paths returned by the tsh proxy db command you ran earlier and paste them into their corresponding fields. See the table below for the Redis Insight fields that correspond to each path:

Click Add Redis Database.

Congratulations! You have just connected to your Redis instance.

Snowflake: DBeaver

The Snowflake integration works only in the authenticated proxy mode. Start a local proxy for connections to your Snowflake database by using the command below:

tsh proxy db --tunnel --port 2000 snowflake

Add a new database by clicking the "add" icon in the top-left corner:

In the search bar of the "Connect to a database" window that opens up, type "snowflake", select the Snowflake driver, and click "Next":

Set "Host" to localhost and "Port" to the port returned by the tsh proxy db command you ran earlier (2000 in the example above). In the "Authentication" section set the "Username" to match the database username passed to Teleport with --db-user and enter any value (e.g., "teleport") in the "Password" field (the value of "Password" will be ignored when establishing a connection but is required by DBeaver to register your database):

Next, click the "Driver properties" tab and set "account" to any value (e.g., "teleport"; as with "Password", the value of "account" will be ignored when establishing a connection but is required by DBeaver to register your database). In "User properties", set "ssl" to off:

Teleport ignores the provided password and the account name as internally it uses values from the Database Agent configuration. SSL set to off disables only encryption on local machine. Connection to Snowflake is encrypted by Teleport.

Now you can click on "Test Connection..." in the bottom-left corner:

Congratulations! You have just connected to your Snowflake instance.

Snowflake: JetBrains (IntelliJ, Goland, DataGrip, PyCharm, etc.)

The Snowflake integration works only in the authenticated proxy mode. Start a local proxy for connections to your Snowflake database by using the command below:

tsh proxy db --tunnel --port 2000 snowflake

In "Database Explorer" click the "add" button, pick "Data Source", and then pick "Snowflake":

Next, set "Host" to localhost and "Port" to the port returned by the tsh proxy db command you ran earlier (2000 in the example above). Set the "Username" to match the one that you are assuming when you connect to Snowflake via Teleport and enter any value (e.g., "teleport") in the "Password" field (the value of "Password" will be ignored but is required to create a data source in your IDE):

Switch to the "Advanced" tab, set any value (e.g., "teleport") for "account", and add a new record named ssl with value off (as with "Password", "account" is ignored while establishing the connection but required by your IDE):

Teleport ignores the provided password and the account name as internally it uses values from the Database Agent configuration. Setting "SSL" to off only disables encryption on your local machine. The connection to Snowflake is encrypted by Teleport.

Now you can click "Test Connection" to check your configuration.

Congratulations! You have just connected to your Snowflake instance.

SQL Server DataGrip

In the DataGrip connection configuration menu, use your proxy's endpoint. This is localhost:4242 in the example below. (See Get connection information for more information.)

Select the "User & Password" authentication option and keep the "Password" field empty:

Click "OK" to connect.

SQL Server DBeaver

In the DBeaver connection configuration menu, use your proxy's endpoint. This is localhost:62652 in the example above. (See Get connection information for more information.)

Use the SQL Server Authentication option and keep the Password field empty:

Click OK to connect.

Cloud Spanner DataGrip

The Cloud Spanner integration works only in the local proxy tunnel mode. Start a local proxy tunnel for connections to your Spanner database by using the command below:

tsh proxy db --tunnel --port 1443 spanner --db-user=<service-account-name> --db-name=<spanner database name>

The database user specified in --db-user should be the name of a GCP service account that can access the Spanner database. The name of the service account should be everything before the "@" of the service account email address, e.g. the name for llama@example-project-123456.iam.gserviceaccount.com is just "llama".

From the DataGrip menu, click "File > New > Data Source from URL", then copy and paste the JDBC URL that was output by tsh proxy db:

The "Google Cloud Spanner" driver should be automatically selected. Click "Ok".

DataGrip does not need GCP credentials - those are already provided by Teleport. On the "General" tab of the new data source, select the "Authentication" dropdown setting and choose "No auth":

Click "Test connection" to ensure the connection is configured correctly, then click "Ok" to create the data source.

Cloud Spanner DBeaver

The Cloud Spanner integration works only in the local proxy tunnel mode. Start a local proxy tunnel for connections to your Spanner database by using the command below:

tsh proxy db --tunnel --port 1443 spanner --db-user=<service-account-name> --db-name=<spanner database name>

The database user specified in --db-user should be the name of a GCP service account that can access the Spanner database. The name of the service account should be everything before the "@" of the service account email address, e.g. the name for llama@example-project-123456.iam.gserviceaccount.com is just "llama".

From the menu, click "Database > Driver Manager":

Search for the "Google Cloud Spanner" driver, select it, and click the "Copy" button to make a custom driver configuration:

Give the custom driver a name, e.g. "Teleport Spanner", then set "URL Template" to this pattern string:

jdbc:cloudspanner://127.0.0.1:{port}/projects/{server}/instances/{host}/databases/{database};usePlainText=true

Click "Ok", then click "Close"

From the menu, click "Database > New Connection from JDBC URL":

Now copy the JDBC URL that was output by tsh proxy db and paste it:

Click "Proceed", then click "Finish".

Oracle SQL Developer

The Oracle integration works only in the authenticated proxy mode. Start a local proxy for connections to your Oracle database by using the command below:

tsh proxy db --tunnel --port 1521 --db-user=<user> --db-name=<db-name> oracle

In "Connections" click the "+" button for a new database connection:

Next, set the name and username from the --db-user parameter. Set connection type to "Custom JDBC" and set the "Custom JDBC URL" from the tsh proxy db command.

Now you can click "Test" to check your configuration.

Congratulations! You have just connected to your Oracle instance.